Knurled knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Fine longitudinal knurling and a slightly domed top. The everyday knob: enough grip for a fingertip, quiet enough for a front panel. Takes a DIN 934 hex nut M3 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M3 is the size for camera plates, small jigs and enclosure lids. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|--…

♥ 0

Cults3D'da aç

#control knob #knob #knurled knob #55mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Benzer modeller

Dome knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Wing knob with hex nut pocket M3 - clamping knob, 4 sizes 30/36/44/54 mm, no supports
Cults3D
Octagon knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Star knob with hex nut pocket M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Cylinder knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Triangular knob with hex nut pocket M3 - clamping knob, 4 sizes 20/25/30/36 mm, no supports
Cults3D
Scalloped knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Handwheel with hex nut pocket M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Cross knob with hex nut pocket M3 - clamping knob, 3 sizes 36/44/54 mm, no supports
Cults3D
Knurled knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports
Cults3D
Knurled knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D

Knurled knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Dome knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Wing knob with hex nut pocket M3 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Octagon knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Star knob with hex nut pocket M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Ribbed knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Cylinder knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Triangular knob with hex nut pocket M3 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Scalloped knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Handwheel with hex nut pocket M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Cross knob with hex nut pocket M3 - clamping knob, 3 sizes 36/44/54 mm, no supports

Knurled knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Knurled knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports