Mic Spacer Sleeve for Sony FX3 / FX6 Mic Holder - Split TPU Sleeve (19 mm and 20 mm shotgun mics)

A split sleeve that stays on your shotgun microphone, so you never lose the loose rubber spacers when swapping mics. Snap it on from the side (no need to unplug the XLR cable), then put the mic in the holder as usual. - Outer diameter 21.4 mm, made to fill the mic holder of the Sony XLR handle on FX3 / FX6. Check your own holder before printing a full set - 44 mm long: flat 37 mm middle for the holder, a small flange at the top and a collar at the bottom so it does not slide along the mic - Sof…

♥ 0