MWO TimberWolf - Modified Rear Toes (Less fragile joint)

A simple remix with just an update to the Rear Toe for the TimberWolf model uploaded by @BobertMax here:https://www.myminifactory.com/object/3d-print-mwo-timberwolf-73841At default scaling on an FDM printer I found the rear toes were both fairly loose in the sockets and pretty fragile/easy to break while repositioning. Because these are just scaled down versions of the other joints on the mech the stiffness drops massively on the tiny connectors for these compared to the other joints, so this r…

♥ 3