Open Cable Routing Channel - 100 mm, Screw Mount (STL + OpenSCAD)

Route cables on a horizontal surface with this open-ended cable channel, installed with the opening facing upward. **Dimensions:** 100 x 30 x 16 mm. Wall and base thickness: 2.4 mm. Internal width: 25.2 mm. Wall height above the floor: 13.6 mm. Two 4.5 mm mounting holes, centered 15 mm from each end. Screws are not included; screw heads protrude into the channel. No lid or retention clip; not intended for upside-down mounting beneath a desk. **Included:** one ready-to-slice STL and editable Ope…

♥ 0