Parallel marking gauge 110 mm - 5 pencil holes at 10, 15, 20, 25 and 30 mm

Marking gauge, 110 x 60 mm. A solid fence 10 mm wide keeps the full 16 mm of height along one edge; the rest of the plate is brought down to 6 mm. - Five 8 mm pencil holes at 10, 15, 20, 25 and 30 mm from the INNER FACE of the fence (measured on the generated mesh, not estimated) - The holes are STAGGERED along the length, 20 mm apart, because five 8 mm holes placed 5 mm apart in a row would overlap each other - Each distance is written beside its own hole in 1.2 mm relief -- the only lettering…

♥ 0