PCB soldering stand 100 mm - 3 grooves 2.2 mm wide, 14 mm deep, NO clamp

Bench block, 100 x 45 mm and 20 mm tall, cut by three grooves 2.2 mm wide and 14 mm deep that run right through the 100 mm length, at a 13 mm pitch, over 6 mm of solid material. - 10.8 mm of material between two grooves, 8.4 mm of edge on each side -- the block under the grooves is what makes it ONE piece - MEASURED ON THE MESH: four solid ribs at mid-height, nothing detached - A standard 1.6 mm PCB stands in a 2.2 mm groove. Three grooves let you park two boards and keep a third upright while…

♥ 0