printedworks
Phone stand 70 mm wide - 18 degree slot and cable window

Phone stand 70 mm wide - 18 degree slot and cable window

Blackcat3dprinting · Cults3D

$3,49CULTS PU - Private Use
Ticari kullanım: izinli görünmüyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Desk and bedside phone stand. A wedge 66 mm deep and 70 mm wide, rising from 9 mm at the front to 38 mm at the back. THE SLOT is 12 mm wide and tilted 18 degrees off vertical, cut right through the width and BLIND 8.1 mm above the plate. The bottom edge of the phone sits in it and butts on the floor, the back of the phone then leans on the rear ramp. The front lip this leaves is 9 mm thick and 13 mm tall. Fits a phone up to 12 mm thick, case included. THE CABLE WINDOW is 9 x 14 mm, drilled thro…

♥ 0

Cults3D'da aç

Benzer modeller