Physically Simulated Wall Ruin with Rubble and Debris Scatter Presupported

This wall ruin has been physically simulated using the same CGI techniques VFX artists use in the film industry to achieve an extra level of realism.Test printing was performed using a resin printer (Anycubic Photon Mono m5s) and the presupported model is also included. The process took approximately 4 hours with a layer thickness of 0.05 mm and an exposure time of 3 seconds, using Anycubic ABS-like 2.0 resin. I cannot guarantee successful FDM printing, as I have no way to test it.

♥ 3