Pot lid rest 120 mm - 6 mm upright slot and two 25 ml drip wells

Pot lid rest, 120 x 66 mm and 22 mm tall. - A 6 mm wide, 16 mm deep slot crosses the piece in its WIDTH: the lid stands UPRIGHT in it, handle up, held by its rim. It takes a rim 1 to 6 mm thick - Either side of the slot, two 43 x 50 mm wells 12 mm deep catch what drips: about 25 ml each - 6 mm of wall between each well and the slot, 10 mm of solid floor under the wells READ THIS BEFORE PRINTING: PLA softens around 60 C. A lid straight off the hob is hotter than that and WILL deform a PLA part.…

♥ 0