Print-in-Place Cable Drag Chain - 9 Links, M3 End Plates, No Assembly - 3D Printer Cable Carrier - STL + 3MF

A cable carrier that prints as one flat piece, already hinged - no pins to push in, no links to snap together. Nine links on 45 degree cone pins, a 14 x 8 mm channel for hot-end, extruder, sensor or LED wiring, and screw plates on both ends. **Works like a real drag chain** - Each link's inner walls carry cone pins that sit in sockets in the next link's outer walls, 0.40 mm clearance on every joint (checked on the final mesh, no link touches another) - The floors butt together when the chain is…

♥ 0