Print-in-Place Vernier Caliper 0-150 mm - 0.1 mm Vernier Scale, Sliding Jaw, No Supports - STL + 3MF

A working vernier caliper that prints flat in one go with the slider already on the rail. Read outside dimensions from 0 to 150 mm to 0.1 mm on the vernier - handy in the workshop, for teaching how a vernier works, or as a spare in the printer drawer. **How it works** - The beam carries a 45 degree diamond tongue along its edge; the slider runs on it in a matching groove with 0.30 mm clearance (checked on the final mesh) - it slides smoothly but cannot come off - An end block stops the slider a…

♥ 0