printedworks
Prusa MK3 Octoprint lit-nozzle and switch, Revised and Improved version R4, including extruder cover REV4

Prusa MK3 Octoprint lit-nozzle and switch, Revised and Improved version R4, including extruder cover REV4

Marc Borowczak · MyMiniFactory

ÜcretsizDownload - Share - Maintain License - Credit - Remix - Noncommercial - Exclusive
Lisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

This project started with a goal to save power (light) when printing on my MK3 Octopi fitted 3d-printer over nights. The modified nozzle hosts 2xTO1 bright white LEDs and 2x100 Ohms resistors, while the nozzle fan holder was modified to host a mini rocker switch. The GND and 5V power are drawn from the line that feeds the Noctua fan, and as such the lighting is enabled as soon as the nozzle heats up. This can be suppressed by flipping the mini rocker, and is also automatically achieved when the…

♥ 14

MyMiniFactory'da aç

Benzer modeller