printedworks
Ratchet clamp print-in-place

Ratchet clamp print-in-place

Luis Carreño · MyMiniFactory

ÜcretsizDownload - Share - Maintain License - Credit - Remix - Noncommercial
Lisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

**UPDATE: I upload a new stl file, to avoid the two ratchet parts become welded, as suggested by @brandonruggles. @alexblanco1 also suggets to print with horizontal expansion se to -0.1 if you get the pieces welded. This is a mini ratchet clamp, design to print in place. It can be scaled up, tested at 150% original size (the green one in the photos is original size, white one is 150%). Printed in ABS, 0,2mm resolution, 40% infill.

♥ 3.196

MyMiniFactory'da aç

Benzer modeller