Recirculating HEPA + Carbon Exhaust Filter for Centauri Carbon 2 (Room or Chamber Mode)

**Print ASA in a 52 °C chamber, or vent filtered air into the room. One filter, two modes, switched by hand in 10 seconds.** A complete HEPA + activated carbon exhaust system for the Centauri Carbon 2 that can send the filtered air **back into the chamber**. That keeps the heat in for ASA and ABS, with no window or duct to the outside. For PLA and PETG, switch to room mode and the filtered air leaves through an open gap so the chamber stays cool. The riser never moves. ### How it works - **Air…

♥ 0