Rodin Coil Torus Pendant - 3D Print Model

A precisely designed model of a Rodin coil, specifically prepared for 3D printing. The model features 24 guided paths: 12 right (R) and 12 left (L). Two groove depths were used: 1.13 mm and 2.38 mm. This allows intersecting paths to run on different planes. SCALE At 100% scale the Rodin Coil Torus pendant are: (based on the wires) Outer diameter: 41.75 mm (1.644 inches) Inner diameter: 12.25 mm (0.482 inch) Ring thickness: 14.75 mm (0.581 inch) Wire gauge: 1.25 mm (0.492 inch) (For your own use…

♥ 1