printedworks
Self watering pot

Self watering pot

Kostas Kehayas · MyMiniFactory

ÜcretsizCreative Commons - Attribution - Noncommercial - ShareAlike
Ticari kullanım: izinli görünmüyor · Atıf istiyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Here is my take on a desktop self watering planter. As the name implies the planter is desktop size thus, small plants (The pot's volume is 266ml and the reservoir's 224ml). For the irrigation of the pot you can use a wick or a cotton shoelace threaded through the holes on the bottom. If your 3d prints don't turn out waterproof you can use wax or waterproof wood glue to seal them off.

♥ 47

MyMiniFactory'da aç

Benzer modeller