Shelf pin drilling jig, 32 mm system, 2 rows of 7 guides of 5.2 mm, edge stop

A 204 x 42 mm rail, 9 mm thick, with two rows of seven through guides of 5.2 mm on a 32 mm pitch, the rows offset by 14 mm so you can drill the front line and the back line of shelf pin holes without measuring twice. 32 mm is the standard system pitch used by flat-pack cabinets. A 7 mm tall stop runs along one edge, moulded in one piece with the rail: press it against the panel edge and every hole lands at the same setback, panel after panel. WHAT YOU GET 1 STL file. One single solid part, no a…

♥ 0