Six-spoke handwheel with hex nut pocket M4 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

$1,11CULTS PU - Private Use

Six spokes instead of four. Lighter than the handwheel and more finely divided, so the hand always finds a spoke. Takes a DIN 934 hex nut M4 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M4 is what most printer beds, carriage plates and small fixtures use. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 30 mm…

♥ 0

Cults3D'da aç

#control knob #knob #six-spoke handwheel #7mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Benzer modeller

Six-spoke handwheel with hex nut pocket M5 - clamping knob, 4 sizes 30/36/44/54 mm, no supports
Cults3D
Six-spoke handwheel with hex nut pocket M6 - clamping knob, 3 sizes 36/44/54 mm, no supports
Cults3D
Six-spoke handwheel with heat-set insert M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for Square 6.0 mm - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Six-spoke handwheel for D-shaft 6.0 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for D-shaft 6.35 mm, shallow flat - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for Round shaft 6.35 mm (1/4 in) - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for Knurled shaft 6 mm, 40 teeth - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for D-shaft 6.35 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for Knurled shaft 6 mm, 18 teeth - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for Split shaft coarse, 18 teeth - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Six-spoke handwheel for Split shaft fine, 24 teeth - 4 sizes 25/30/36/44 mm, no supports
Cults3D

Six-spoke handwheel with hex nut pocket M4 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Benzer modeller

Six-spoke handwheel with hex nut pocket M5 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Six-spoke handwheel with hex nut pocket M6 - clamping knob, 3 sizes 36/44/54 mm, no supports

Six-spoke handwheel with heat-set insert M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Square 6.0 mm - 4 sizes 30/36/44/54 mm, no supports

Six-spoke handwheel for D-shaft 6.0 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for D-shaft 6.35 mm, shallow flat - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Round shaft 6.35 mm (1/4 in) - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Knurled shaft 6 mm, 40 teeth - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for D-shaft 6.35 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Knurled shaft 6 mm, 18 teeth - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Split shaft coarse, 18 teeth - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Split shaft fine, 24 teeth - 4 sizes 25/30/36/44 mm, no supports