Slider Clicker Fidget – Print-in-Place Click-Clack Slider, 7 Clicks, No Supports | STL

A pocket click-clack fidget that comes off the bed assembled: slide the knob and feel 7 crisp clicks. 64 x 22 x 18 mm - desk or keychain size. HOW IT WORKS: the slider stands on the bed, captured under two rails of the housing. Two 1 mm spring tongues with small teeth click over ribs on the inner walls every 6 mm; everywhere else there is 0.4 mm clearance. The cutaway image shows the mechanism. PRINTING: as exported (flat), PLA or PETG, 0.2 mm layers, 3 walls, 20% infill, NO supports, no brim.…

♥ 0