SnapRail Evo for an Angled Kayak Track

A SnapRail rail reshaped to sit square on an angled kayak track. Mine is on the inside wall of a Catch Mode 110, which leans about 24.5 degrees, and the correction is built into the rail so the accessories end up level. The rail is 150 mm with five positions at 30 mm pitch. A tray goes in positions 1 and 2, a cup holder in 4 and 5, and 3 stays empty so the two clear each other. You get the rail plus an optional slicer modifier that puts solid infill around the bolt zones, which is a modifier an…

♥ 0 · ↓ 1