Soap Dish with drip tray – 2-part draining soap holder, no supports

Two-part soap dish: a slotted grate keeps the bar dry, the tray underneath collects the water so nothing drips on the sink. The grate rests on five posts, lift it out to empty and rinse the tray. Both parts print flat with no supports. - Tray 112 × 82 × 24 mm, 3 mm floor, rounded corners - Grate 104 × 74 × 5 mm with 13 drainage slots (3 mm), sits 11 mm above the tray floor - Fits standard bar soap up to 100 × 70 mm - Print both parts as oriented, 0.2 mm layers; approx. 2 h 30 min and 70 g in to…

♥ 0