Spider Web Fidget Spinner – Engraved Web + Spider, Print-in-Place | Halloween STL

A round spinner with an engraved spider web and a raised spider dangling on its thread. Fill the web with white paint. 72 x 72 x 10 mm. HOW IT WORKS: - Print-in-place: the hub and the ring print together, already assembled - no bearings, no glue, no supports. - 45-degree V-joint with a 0.42 mm gap; twist firmly once after printing to free it. - Print flat in PLA or PETG, 0.2 mm layers. If the parts fuse, enable elephant-foot compensation in your slicer. GOOD TO KNOW: - Digital checks: watertigh…

♥ 0