Spoiler Opel Omega A 1986-1993

17\10\2026 Dear friend, please do not use supports inside the holes. The design is intentional, and no supports are required there. The total length of each hole is 100 mm, while the connecting section is 90 mm long—leaving a 5 mm margin on each side (10 mm in total) to account for any potential issues with bridging during the print. I recommend using a 0.6 mm or 0.8 mm nozzle. Walls: 5–6 Infill: 10–20% Top/bottom layers: 6–7 layers

♥ 0