Stackable Car Shelf - Build Your Own Tower | 1:64 Diecast | No Supports

One shelf module. The pegs on top drop into the holes underneath, so you can stack as high as you like - and each one is a short, cheap print. Made for **1:64 scale diecast cars** - the small toy car size, about **68 x 28 mm**. - Car slot is **70 x 32 mm**, so every 1:64 car fits with room to spare - Two wheel stops in every car dish, so nothing rolls off - **No supports anywhere** - every roof inside is a 45-degree tent or a pointed arch - Prints flat on the bed, no raft and no brim needed - O…

♥ 0