Stumpy tail cattle dog flexi

STL/3MF Multicolor Regular eyes/ 6mm eye sockets 1 part (non moving head)/ 2 Part *(Head and body) plain body or with bandana agility course A frame Print Settings: Print in Place No Supports needed Arachne walls 2-3 walls 5-10% infill Tested down to 70% YMMV. *The heads will need to be heated up to fit over the ball on the 2 part version. Set your printer’s heat bed to 65C, lay the heads on it for a few minutes and then pop them on. If you have adhesion issues, try a brim, glue stick or Aquane…

♥ 2