The Chain-Breaker

Polygon count: 10,422 faces Status: Healthy, watertight, no errors — ready to print directly Settings: Material: PLA (PLA Matte preferred for a clay-like finish) Nozzle: 0.4 mm Layer height: 0.16 mm (0.12–0.08 mm for finer detail) Infill: 5–10% Wall lines: 2–3 Supports: Use Tree Supports for this organic figure; set to "On build plate only" if supports can rise from the base, or "Supports Everywhere" if there are overhangs/floating parts. Before printing: Clean the build plate with isopropyl al…

♥ 0