printedworks
Three-point hitch pin rack fit test cat. 1–3 (test part, free)

Three-point hitch pin rack fit test cat. 1–3 (test part, free)

Magmacode · Cults3D

ÜcretsizCC BY - Attribution
Ticari kullanım: izinli görünüyor · Atıf istiyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

**Free test part for our pin rack: all six pin bores (cat. 1/2/3) and the linch pin holes 5 to 12, with engraved sizes.** A flat plate, 6 mm high, with the six through bores of the pin rack (20 / 23.4 / 26.4 / 29.7 / 33 / 38 mm, value engraved in front) and a row of linch pin holes 5.5 / 6.5 / 8.5 / 10.5 / 12 mm (size next to each). Push your pin through: it should pass with a little play and hang by its head. Push the linch pin through and close the bow around the edge; the plate is as high as…

♥ 0

Cults3D'da aç

Benzer modeller