Toothbrush Holder – 3 manual + 2 electric / toothpaste, draining, no supports

Countertop toothbrush holder with three 18 mm holes for manual brushes and two 31 mm holes for electric toothbrush handles or a toothpaste tube. Every hole has a 4 mm drain in the bottom so water never pools. Prints in one piece, no supports. - 136 × 46 × 72 mm, rounded corners, 6 mm floor - Holes 66 mm deep with a 1.5 mm entry chamfer: brushes stand upright and do not touch each other - Print as oriented, 0.2 mm layers, 15 % infill; approx. 4 h and 95 g in PLA (PETG recommended for a wet bathr…

♥ 0