Trench of death #2 - valley tile set
BlackSheepScenery · MyMiniFactory
Lisans bilgisi ve sorumluluk reddi
Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.
This set contains 20 valley tiles. This is made to combine with trench of death #2 sets'. 1 current tile will recuire an avrage of 90gr / 30meter of PLA. With the standard parameters I used, it takes about 2hours and 10 minutes to print, at 300mm/s, 0.2 layer height and with an infill of 4%. So a bit the opposite of the previous fast to print version. This basic set contains 20 tiles: 20 different valley tiles Tile size: The original basic tiles, without the sandbags and ground structure attemp…
♥ 14
MyMiniFactory'da açBenzer modeller
Trench of death #2 - 4th varriant trenches
MyMiniFactory
Trench of death #2 - remasterd original tiles
MyMiniFactory
Trench of death #2 - Complete original set
MyMiniFactory
/https://fbi.cults3d.com/uploaders/16741003/illustration-file/e783934a-819d-48ee-80e5-ce36b508d8e2/Schermafbeelding-2026-10-01-230841.png)
Trench of death #2 - Wide trench - alt Trench end (prototype)
Cults3D
Trench of death #2 - 2nd varriant tiles
MyMiniFactory
Trench of death #2 - hull down tank tile set
MyMiniFactory
Trench of death #2 - varriant battlefield tiles
MyMiniFactory
Trench of death #2 - 1st varriant tiles
MyMiniFactory
Trench of death #2 - the blank tile edition
MyMiniFactory
Trench of death #2 2x dug in tiles with fire post
MyMiniFactory
Trench of death #2 - Concrete bunkers Addon pack
MyMiniFactory
Trench of death 2: additional Var 2 Corner tile
MyMiniFactory