Turntable (manual)

A simple turntable for painting models/3d parts etc. No bearings needed. Just put all the parts together. I used super glue to fix body1 and body2 together. Print "body2.stl" with max infill. Gear ratio is 1:2 This turntable is strong with heavy parts and stays put on the table well enough. You can use a double sided tape if needed. It is also easy to use the knob with your thumb while holding the body. OPTIONAL PARTS-you can use “table_16cm_optional.stl” instead of “table-12cm.stl” if you need…

♥ 3