Vereda3D Linha — Pen Tray with Cable Pass-Through | STL + SCAD

A long divided tray for pens and small desk items, with aligned open cable notches in the rear wall and divider. Overall dimensions: 190 × 66 × 18 mm. Notch width: 12 mm, starting 5 mm above the inner floor. Lay a cable through the open notches; this is not a cable clamp and does not grip it. Check connector size; not all connectors will fit. Includes STL and editable OpenSCAD source. One-piece model, no assembly or hardware. Geometry authored for this project with AI assistance; no third-party…

♥ 0