VFC Scar Folding Charging Handle

The charging handle is full usable, BUT when using it for GBBR you need to print it at very least in PAL+ (better PETG,ASA, ABS, Nylon or similar filament). For esthetic reasons without any hard usage on AEGs, PLA will do fine. For the flip mechanism you´ll need a small torsion spring with: - 5mm outer diameter - 3 turns (or roughly 7mm height) - 90° angled pins ( https://www.amazon.de/dp/B0DZCSYZMQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ) Also you´ll need one M3x20mm, one M3x16mm socket head s…

♥ 3