Wall Caliper Holder - Closed-Bottom Groove for a 150 mm Caliper

A caliper left flat on the bench gets buried, knocked off, or covered in swarf. This plate screws to the wall or to the side of the bench and gives it a home: an 18 mm wide, 12 mm deep groove that the caliper stands in. The groove is CLOSED AT THE BOTTOM - there is 10 mm of solid material under it, so the instrument rests on the floor of the groove instead of sliding straight through. Two 4.5 mm through holes at the top for the screws, and 150 mm embossed underneath so you know at a glance whic…

♥ 0