Wall Mounted Filament Holder
Connor M · MyMiniFactory
Ticari kullanım: izinli görünmüyor · Atıf istiyorLisans bilgisi ve sorumluluk reddi
Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.
Spool holder for mounting on a wall. One of my printers is tight in a corner and it has a side-fed extruder so I needed a spot above it to hold the filament. I made it large enough to fit 3KG spools as well as the more typical 1KG spools. Uses wood screws (#8 to mount and #6 screws to assemble). 3/4" PVC pipe is used for the spool axel. The spigots are super glued into the ends of the PVC pipe. Included is a spigot for 12 mm OD pipe, as I have a couple of odd spools with very small center holes.
♥ 31
MyMiniFactory'da açBenzer modeller
Wall Mounted Filament Spool Holder - 3D Printing Guardian
Thingiverse
Wall-mounted filament spool holder
Printables
Wall mounted filament spool holder
Thingiverse
Wall mounted filament spool holder
Thingiverse
Wall mounted filament spool holder with 608 bearings.
Printables
Wall mounted filament spool holder
Thingiverse
Wall Mounted Filament Spool Holder
Thingiverse
/https://fbi.cults3d.com/uploaders/35832563/illustration-file/796a470a-55f4-4876-8c51-ab86936c23ff/cults_spool_double.png)
Wall-Mounted Filament Spool Holder – Single & Double, No Supports
Cults3D
Wall-Mounted Modular Filament Spool Holder with Rollers
Thingiverse
Wall Mounted Stack-able Filament Spool Holder
Thingiverse
Simple wall mounted filament spool holder
Printables
Zortrax M200 wall mounted Spool Holder & Filament Guide
Thingiverse