WD40 Drunk Ghost Puking - Functional Spray Nozzle Cap (2.8–3.6 mm Fit)

Description: WD40 Drunk Ghost Puking - Functional Spray Nozzle Cap multiple inner diameters: 2.8 mm / 3.0 mm / 3.2 mm / 3.4 mm / 3.6 mm Print settings: Material: PLA+ or PETG Layer height: 0.08–0.20 mm Walls: 4–5 Infill: 20–40% Supports: tree supports Print in the shown orientation so the spray channel stays open. WD-40 is a trademark of its respective owner. This model is an independent accessory project and is not affiliated with the manufacturer.

♥ 1