1-1/4 in OD Flat 3-Into-1 Exhaust Merge Collector Template STL – 3 Runner Header Cutting Jig for Turbo & Manifold Fabrication

$5,59CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Digital 3D printable tube-marking template for fabricating a FLAT 3-INTO-1 MERGE COLLECTOR from exact 1-1/4 in OD round tubing. This model belongs to the North America Inch OD series and is designed for exhaust fabricators, race header builders and motorsport workshops using fractional-inch tubing sizes. TUBE OUTSIDE DIAMETER: 1-1/4 in OD Exact metric equivalent: Ø31.750 mm 1-1/4 in = exactly 31.750 mm The exact dimensional reference for this STL is 1-1/4 in outside diameter tubing. TEXT ON THE…

♥ 0

Cults3D'da aç

#1-1/4 header jig #125 inch exhaust #1-1/4 tube guide #flat 3-1 collector #exhaust merge template #three runner header #primary tube marking #race header tool #turbo manifold fixture #collector fabrication jig #fractional inch tubing #side by side merge

1-1/4 in OD Flat 3-Into-1 Exhaust Merge Collector Template STL – 3 Runner Header Cutting Jig for Turbo & Manifold Fabrication

Benzer modeller

1-3/4 in OD Flat 3-Into-1 Exhaust Collector Template STL – Three Runner Header Merge Cutting Jig for Race & Turbo Manifold Fabrication

2-1/4 in OD Flat 3-Into-1 Merge Collector Template STL – Three Runner Exhaust Header Cutting Jig for Race & Turbo Manifold Fabrication

50.8 mm / 2 in OD Pie Cut Jig 22.5° – Quick 4 Section 90° Elbow from Straight Tube – CLR 1D 1.5D 2D – Bandsaw STL

42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

42.4 mm / 1.67 in 15° Pie Cut Template – 6 Pieces 90° Elbow – 1D 1.5D 2D in One Jig – Bandsaw Mitre Bend STL

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL

48.3 mm / 1.9 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Pipe Bend Kit STL

48.3 mm / 1.9 in Pie Cut Jig 22.5° – Just 4 Pieces for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL

50.8 mm / 2 in OD Pie Cut Jig 10° – 9 Slice Show Quality Bend – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Cutting Fixture STL