1-1/8 in OD Flat 3-Into-1 Merge Collector Cutting Template STL – 3 Runner Exhaust Header & Turbo Manifold Fabrication Tool

$5,59CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Digital 3D printable tube-marking template for fabricating a FLAT 3-INTO-1 MERGE COLLECTOR from exact 1-1/8 in OD round tubing. This model belongs to the North America Inch OD series and is intended for exhaust fabricators, header builders and motorsport workshops using fractional-inch tubing standards. TUBE OUTSIDE DIAMETER: 1-1/8 in OD Exact metric equivalent: Ø28.575 mm 1-1/8 in = exactly 28.575 mm The exact dimensional reference for this STL is 1-1/8 in outside diameter tubing. TEXT ON THE…

♥ 0

Cults3D'da aç

#1-1/8 header jig #1-1/8 exhaust tube #inch od collector #flat 3 into 1 #three primary merge #exhaust header tool #race header fixture #turbo manifold jig #fractional tube guide #collector cutting jig #header tube stencil #side by side merge

1-1/8 in OD Flat 3-Into-1 Merge Collector Cutting Template STL – 3 Runner Exhaust Header & Turbo Manifold Fabrication Tool

Benzer modeller

2-1/8 in OD Flat 3-Into-1 Merge Collector Template STL – Three Runner Exhaust Header Cutting Jig for Race & Turbo Manifold Fabrication

1-7/8 in OD Flat 3-Into-1 Merge Collector Template STL – Three Runner Exhaust Header Cutting Jig for Race & Turbo Manifold Fabrication

1-5/8 in OD Flat 3-Into-1 Merge Collector Template STL – 3 Runner Exhaust Header Cutting Jig for Turbo & Race Manifold Fabrication

1-3/8 in OD Flat 3-Into-1 Exhaust Collector Template STL – Three Runner Header Merge Cutting Jig for Turbo & Race Manifold Fabrication

2-3/8 in OD Flat 3-Into-1 Merge Collector Template STL – Three Runner Exhaust Header Cutting Jig for Race & Turbo Manifold Fabrication

50.8 mm / 2 in OD Pie Cut Jig Bundle – 10° 15° 18° 22.5° All in One – 1D 1.5D 2D Radius Inserts – Bandsaw Fabrication Kit STL

50.8 mm / 2 in OD Pie Cut Jig 22.5° – Quick 4 Section 90° Elbow from Straight Tube – CLR 1D 1.5D 2D – Bandsaw STL

50.8 mm / 2 in OD Pie Cut Jig 18° – 5 Cuts per 90° Turbo & Intercooler Bends – 1D 1.5D 2D Inserts – Bandsaw STL

50.8 mm / 2 in OD 15° Pie Cut Template – 6 Piece 90° Exhaust Elbow – Radius 1D 1.5D 2D – Bandsaw Mitre Jig STL

50.8 mm / 2 in OD Pie Cut Jig 10° – 9 Slice Show Quality Bend – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Cutting Fixture STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL