125x15mm tube printed as vase for Z axis test on high parts

Chevdor · Printables

ÜcretsizCreative Commons — Attribution — Noncommercial

Ticari kullanım: izinli görünmüyor · Atıf istiyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Printables sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

This model will print in 33 minutes. It allow testing your z-axis for wobble on a 125mm tall part.

♥ 9 · ↓ 216

Printables'da aç

#vase #tube #zaxis

Benzer modeller

NEMA 17 mount for 15x15mm extrusion
Printables
aos 3.5 v5 gps mount 15x15mm
Thingiverse
Akustikpaneel Schuhhalter & Sneaker Halterung ohne Bohren (15x15mm) – 3-teilig mit Schraube & Rändelmutter
Cults3D
CR-10 All-In-One support for Noctua 120x15mm power supply fan
Thingiverse
Filament 1.75/3.00 mm Holder (Kossel mini 3D 15x15mm)
Thingiverse
Rechteckkanal mit Muffe 125x125 mm, 250 mm lang – Lüftungskanal zum Stecken, ohne Stützen
Cults3D
Square duct to round adapter 125x125 to 125 mm, socket on flat end – offset, flush to wall
Cults3D
Square duct with socket 125x125 mm, 250 mm long – square ventilation duct, push-fit, no supports
Cults3D
Rechteckkanal 125x125 mm, 200 mm lang – Lüftungskanal, Stutzen beidseitig, ohne Stützen
Cults3D
Square duct 125x125 mm, 200 mm long – square ventilation duct, spigot ends, no supports
Cults3D
Square duct to round adapter 125x125 to 150 mm – offset, flush to wall, wall/ceiling mount
Cults3D
Square duct to round adapter 125x125 to 125 mm – offset, flush to wall, wall/ceiling mount
Cults3D

125x15mm tube printed as vase for Z axis test on high parts

Benzer modeller

NEMA 17 mount for 15x15mm extrusion

aos 3.5 v5 gps mount 15x15mm

Akustikpaneel Schuhhalter & Sneaker Halterung ohne Bohren (15x15mm) – 3-teilig mit Schraube & Rändelmutter

CR-10 All-In-One support for Noctua 120x15mm power supply fan

Filament 1.75/3.00 mm Holder (Kossel mini 3D 15x15mm)

Rechteckkanal mit Muffe 125x125 mm, 250 mm lang – Lüftungskanal zum Stecken, ohne Stützen

Square duct to round adapter 125x125 to 125 mm, socket on flat end – offset, flush to wall

Square duct with socket 125x125 mm, 250 mm long – square ventilation duct, push-fit, no supports

Rechteckkanal 125x125 mm, 200 mm lang – Lüftungskanal, Stutzen beidseitig, ohne Stützen

Square duct 125x125 mm, 200 mm long – square ventilation duct, spigot ends, no supports

Square duct to round adapter 125x125 to 150 mm – offset, flush to wall, wall/ceiling mount

Square duct to round adapter 125x125 to 125 mm – offset, flush to wall, wall/ceiling mount