Square duct 125x125 mm, 200 mm long – square ventilation duct, spigot ends, no supports

$2,24CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Straight rectangular duct for 125 × 125 mm ventilation lines, 200 mm long, spigot at both ends. Both ends slide into any 125 × 125 mm socket of this range, so a run grows piece by piece. **Picture 1:** multi-view drawing with all dimensions and cross-sections. **Picture 2:** the part as a render. **Picture 3:** a section view. ## Dimensions (mm, measured on the CAD solid) | Dimension | Value | |---|---| | Nominal size (outside of the spigot) | 125 × 125 mm | | Inside dimensions | 120.2 × 120.2…

♥ 0

Cults3D'da aç

#rectangular duct #flat duct #125x125 duct #flat ventilation duct #square duct #square duct 125x125 #ventilation duct #air duct #straight duct #rectangular duct 125x125 #200mm flat duct #125x125mm

Square duct 125x125 mm, 200 mm long – square ventilation duct, spigot ends, no supports

Benzer modeller

Square duct with socket 125x125 mm, 250 mm long – square ventilation duct, push-fit, no supports

Square duct to round adapter 125x125 to 125 mm, socket on flat end – offset, flush to wall

Square duct to round adapter 125x125 to 150 mm – offset, flush to wall, wall/ceiling mount

Square duct to round adapter 125x125 to 125 mm – offset, flush to wall, wall/ceiling mount

Übergang eckig 125x125 auf rund 125 mm, Muffe am eckigen Ende – versetzt, bei Wand bündig

Übergang eckig 125x125 auf rund 150 mm – versetzt, bei Wand bündig, Wand-/Deckenmontage

Übergang eckig 125x125 auf rund 125 mm – versetzt, bei Wand bündig, Wand-/Deckenmontage

Square duct with socket 100x100 mm, 250 mm long – square ventilation duct, push-fit, no supports

Square duct with socket 150x150 mm, 250 mm long – square ventilation duct, push-fit, no supports

Square duct 100x100 mm, 400 mm long – square ventilation duct, spigot ends, no supports

Square duct to round adapter 150x150 to 150 mm, socket on flat end – offset, flush to wall

Square duct to round adapter 80x80 to 100 mm – offset, flush to wall, wall/ceiling mount