45 / 1911 Grip Panels - RainDrip Camo - Paintball Autococker, CCM, Empire Sniper

$5,00CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

DIMENSIONS Panel footprint: 58.82 x 96.31 mm Thickness: 4.00 mm, 4.60 mm over the raised pattern Raised pattern height: 0.60 mm Screw hole spacing: 3.070 in (77.97 mm) center to center Screw holes: 0.187 in through, 0.324 in counterbore for standard #8-36 grip screws FITS Paintball 45 pattern frames: CCM 45, WGP Autococker, Empire Sniper and other 45 frames. Full size and Commander length 1911 frames. Caliber does not matter. DOES NOT FIT Officer and compact 1911 frames. Double stack 1911 and 2…

♥ 0 · ↓ 1

Cults3D'da aç

#paintball #autococker #1911 #grip panels #grips #ccm 45 #empire sniper #two color #multicolor #3d printed #camo #camouflage

45 / 1911 Grip Panels - RainDrip Camo - Paintball Autococker, CCM, Empire Sniper

Benzer modeller

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)

Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys

45-70 Storage Box, 20 Rounds

HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings

Perfluorooctanesulfonic acid — CAS 1763-23-1

Tris(2,4-di-tert-butylphenyl) phosphite

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL

44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL