45, 40, and 35 degree offset M-lok to M-lok mounting plate

$1,00CULTS PU - Private Use

This adapter plate allows you to mount M-lok accessories on the "corner" of a handguard, where there aren't M-lok slots: at 1:30, 4:30, 7:30, and 10:30. Will work to offset in either direction from an M-lok slot, opening up mounting solutions that are otherwise impossible.Tuck flashlights out of the way, mount switches in a more convenient spot, etc. 3 separate angles included, so you can find the best fit for your rifle! The 40 degree offset will work with most handguards, and gives a bit of c…

♥ 0

Cults3D'da aç

#m-lok #handguard #mounting plate #offset #mlok

Benzer modeller

4-cylinder Merge Collector Jig 1.25", 1.5", 2.0" and 2.5"
Cults3D
Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)
Printables
Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys
Thingiverse
45-70 Storage Box, 20 Rounds
Thingiverse
HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings
Thingiverse
Perfluorooctanesulfonic acid — CAS 1763-23-1
Sketchfab
Tris(2,4-di-tert-butylphenyl) phosphite
Sketchfab
42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL
Cults3D

45, 40, and 35 degree offset M-lok to M-lok mounting plate

Benzer modeller

4-cylinder Merge Collector Jig 1.25", 1.5", 2.0" and 2.5"

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)

Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys

45-70 Storage Box, 20 Rounds

HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings

Perfluorooctanesulfonic acid — CAS 1763-23-1

Tris(2,4-di-tert-butylphenyl) phosphite

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL