.45-70 Govt Ammo Tray (20)

$2,49CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Ammo Tray - .45-70 Govt (20) - 5 x 4 grid of 15.8 mm chamfered holes, 40 mm deep, holds a box of 20 lever-gun or single-shot rounds upright. Prints as-is, no supports. Size: 105 x 98 x 44 mm. File: ammo_tray_45_70.stl (millimetres, already oriented on the bed). Print settings: Layer height: 0.2-0.28 mm; Infill: 15%, 3 walls; Supports: No; Material: PLA or PETG; Nozzle: 0.4 mm. License: Private use (CULTS PU). Print for your own personal use; please do not share, resell or sell prints of this fi…

♥ 0

Cults3D'da aç

#gun safe storage #range accessories #3d print file #stl file #shooting gift #45-70 ammo tray #45-70 govt #reloading block #ammo storage #cartridge holder #lever action #ammo organizer

.45-70 Govt Ammo Tray (20)

Benzer modeller

CBOX AMMO BOX 45-70 GOVT AMMUNITION STORAGE 80/90/100/110/120MM ROUND CASE ORGANIZER 45-70govt

SBOX AMMO BOX 45-70 GOVT AMMUNITION STORAGE 10/20/25/50/100 ROUNDS CRATE ORGANIZER 45-70govt

DBOX AMMO BOX 45-70 GOVT AMMUNITION STORAGE 10/20/25/50/100/150 ROUNDS CRATE ORGANIZER 45-70govt

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)

Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys

45-70 Storage Box, 20 Rounds

HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings

Perfluorooctanesulfonic acid — CAS 1763-23-1

Tris(2,4-di-tert-butylphenyl) phosphite

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL