45 Centimeter Tall ROCKET 99% 3D Printed for 24mm motor

ÜcretsizCreative Commons — Attribution

Ticari kullanım: izinli görünüyor · Atıf istiyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Printables sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

This model is made for 24mm model rocket motors with 99% of the model 3D printed

♥ 6 · ↓ 64

Printables'da aç

#rocket #modelrocket #modelrocketry

Benzer modeller

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)
Printables
Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys
Thingiverse
45-70 Storage Box, 20 Rounds
Thingiverse
HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings
Thingiverse
Perfluorooctanesulfonic acid — CAS 1763-23-1
Sketchfab
Tris(2,4-di-tert-butylphenyl) phosphite
Sketchfab
42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL
Cults3D

45 Centimeter Tall ROCKET 99% 3D Printed for 24mm motor

Benzer modeller

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)

Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys

45-70 Storage Box, 20 Rounds

HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings

Perfluorooctanesulfonic acid — CAS 1763-23-1

Tris(2,4-di-tert-butylphenyl) phosphite

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL

44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL