45 mm / 1.77 in Flat 3-Into-1 Exhaust Collector Template STL – 3 Runner Merge Cutting Guide for Header & Turbo Manifold Fabrication

$5,59CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Digital 3D printable cutting and marking template for fabricating a FLAT 3-INTO-1 EXHAUST MERGE COLLECTOR from Ø45.0 mm round tubing. This model belongs to the Europe Metric OD series and is designed for three equal-diameter runner tubes arranged side-by-side in the same plane before being joined into a single collector. TUBE OUTSIDE DIAMETER: Ø45.0 mm Imperial reference: Approximately 1.77 in 45.0 mm = approximately 1.772 in. The exact design reference for this STL is Ø45.0 mm OD. COLLECTOR ST…

♥ 0

Cults3D'da aç

#45mm exhaust jig #flat three runner #3 to 1 collector #header merge stencil #manifold tube guide #side by side header #exhaust collector tool #turbo runner merge #divided exhaust layout #twin scroll header #45mm pipe template #collector fitup jig

45 mm / 1.77 in Flat 3-Into-1 Exhaust Collector Template STL – 3 Runner Merge Cutting Guide for Header & Turbo Manifold Fabrication

Benzer modeller

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)

QIDI Q2 Riser 45mm

Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys

45-70 Storage Box, 20 Rounds

HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings

Perfluorooctanesulfonic acid — CAS 1763-23-1

Tris(2,4-di-tert-butylphenyl) phosphite

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL