45 RPM / 7 inch Record Zoetropes

45 RPM / 7 inch Record Zoetropes

Geoff · Printables

ÜcretsizCreative Commons — Attribution — Noncommercial — Share Alike

A couple of fun mini-zoetropes for spinning on a record player, in two sizes with strip templates.

♥ 38 · ↓ 153

Printables'da aç

#animation #zoetrope #puck #recordplayer #vinylrecords #7inchrecord #45rpmadapter

Benzer modeller

Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)
Printables
Shallower version of the 45 degree stand, suits remixed Arturia Keystep Janko keys
Thingiverse
45-70 Storage Box, 20 Rounds
Thingiverse
HO Scale 3 9/16" tall Bridge Abutment with 45 Deg Wings
Thingiverse
Perfluorooctanesulfonic acid — CAS 1763-23-1
Sketchfab
Tris(2,4-di-tert-butylphenyl) phosphite
Sketchfab
42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL
Cults3D