Bar knob for Split shaft fine, 24 teeth - 4 sizes 30/36/44/54 mm, no supports

Two tips opposite each other, the bar knob from old test equipment. Both ends point; mark one with a dab of paint and the setting reads from either side. For the fine split shaft with 24 teeth. The number that trips people up: this shaft measures 5.97 mm over the knurl, not 6.35 - the 1/4 inch is the plain body, the splines are turned down. A knob bored for 6.35 sits loose and spins. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |-…

♥ 1