Bar knob for Split shaft coarse, 18 teeth - 4 sizes 30/36/44/54 mm, no supports

Two tips opposite each other, the bar knob from old test equipment. Both ends point; mark one with a dab of paint and the setting reads from either side. For the coarse split shaft with 18 teeth, 5.99 mm over the knurl. If your knob rocks on the shaft you have the fine 24-tooth type instead. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 30 mm | 15.6 mm | 3.7 cm³ | 4.7 g | | 36 mm | 15.6 mm | 5.4 cm³ | 6.9 g | |…

♥ 1