Cylinder knob for D-shaft 5.0 mm - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A straight cylinder with five circumferential grooves. The quiet one - it disappears into a panel instead of decorating it. For the 5 mm shaft with a flat at 4.52 mm - the NEMA 17 stepper shaft, the one on your printer's Z axis and extruder. Bore built to 4.6 mm. A knob bored for 4.0 wobbles on it; measure across the flat if unsure. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 15.6 mm | 2.2 cm³ | 2.8 g…

♥ 1

Cults3D'da aç

#control knob #knob #cylinder knob #5mm shaft #d shaft #5mm d shaft #3d printer #stepper motor #nema 17 #control knob for potentiometer #extruder #fits nema 17

Cylinder knob for D-shaft 5.0 mm - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Cylinder knob for D-shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Square shaft 12.0 mm - 4 sizes 30/36/44/54 mm, no supports

Cylinder knob for Square shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Square 10.0 mm - 4 sizes 25/30/36/44 mm, no supports