Cylinder knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A straight cylinder with five circumferential grooves. The quiet one - it disappears into a panel instead of decorating it. For the fine 40-tooth knurled 6 mm shaft. Four manufacturers dimension this one identically: 6.0 mm over the teeth, knurl 7 mm long. Press-fit. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 16.6 mm | 2.3 cm³ | 3.0 g | | 20 mm | 16.6 mm | 4.0 cm³ | 5.1 g | | 25 mm | 18.0 mm | 5.2 cm³…

♥ 1

Cults3D'da aç

#control knob #knob #cylinder knob #6mm shaft #40 spline #40 teeth #knurled shaft #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer

Cylinder knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Cylinder knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Broach 20 teeth, 7.6 mm - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Knurled shaft 4 mm, 16 teeth - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Square shaft 12.0 mm - 4 sizes 30/36/44/54 mm, no supports

Cylinder knob for Square shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for D-shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports