Cylinder knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A straight cylinder with five circumferential grooves. The quiet one - it disappears into a panel instead of decorating it. Takes a DIN 934 hex nut M4 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M4 is what most printer beds, carriage plates and small fixtures use. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|--…

♥ 0

Cults3D'da aç

#control knob #knob #cylinder knob #7mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Cylinder knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Benzer modeller

Cylinder knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Cylinder knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Cylinder knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Cylinder knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Cylinder knob with hex nut pocket M5 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Cylinder knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Cylinder knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Cylinder knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Square shaft 12.0 mm - 4 sizes 30/36/44/54 mm, no supports

Cylinder knob for Square shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Cylinder knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Cylinder knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports